Infeed Unit; Available Infeed Units; Function Modules - Siemens SINAMICS S120 Commissioning Manual

Commissioning
4.8 Basic parameterization of the drive objects
Function diagrams (see SINAMICS S120/S150 List Manual)
• 8134
Overview of important parameters (see SINAMICS S120/S150 List Manual)
Adjustable parameters
• p0771[0...2]
• p0777[0...2]
• p0778[0...2]
• p0779[0...2]
• p0780[0...2]
• p0783[0...2]
• p0784[0...2]
Display parameters
• r0772[0...2]
• r0774[0...2]
• r0786[0...2]
4.8.2

Infeed unit

4.8.2.1

Available infeed units

Infeed units (Line Modules) include the central line infeed for the DC link. Various infeed
units are available to address various application scenarios:
Basic parameterization of the infeed unit
Define the following data in the basic parameterization of the infeed unit:
● Function modules
● Line data/operating mode
● Enable logic
● Line contactor control
4.8.2.2

Function modules

☐
166
Diagnostics - measuring sockets (T0, T1, T2)
CI: Measuring sockets signal source
Measuring sockets characteristic curve value x1
Measuring sockets characteristic curve value y1
Measuring sockets characteristic curve value x2
Measuring sockets characteristic curve value y2
Measuring sockets offset
Measuring sockets limitation on/off
Measuring sockets signal to be output
Measuring sockets output voltage
Measuring sockets scaling per volt
"Infeed unit > Parameters > Basic parameterization > Function Modules"
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0