5.6
Mounting a POM4220 power output module
Tool
You will need a Torx T8 screwdriver.
Mounting the POM
The procedure for mounting the POM is described below:
Figure 5-7
Steps
1
2
NOTICE
Possible damage of the POM
Make sure to insert the POM straight and not tilted because the POM may be damaged
otherwise.
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006
Mounting the POM
Slide the POM into the rack
Screw in place at the top and bottom of the front plate
5.6 Mounting a POM4220 power output module
①
Installation/mounting
②
59