9
03.04
Select
printer
Editor
DOS
SHELL
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
This softkey will function only if a printer is installed under Windows
NT. It can be used to print displays and data from the Start-up
operating area.
You select the printer on which you wish to print data/displays (default
setting: Output as bitmap file)
For additional information, please see
/FBA/ Description of Functions, Drive Function.
This key opens the ASCII editor in which files can be edited at DOS
level. You can select existing drives via vertical softkeys.
You open a DOS shell.
Enter the "Exit" command to go back to the "Colors" menu.
"Startup" Operating Area
9.6 HMI
9-453
9