Dry Run Feedrate For Dry Run Dry - Siemens SINUMERIK 840D Operator's Manual

5
03.04

5.5.4 Dry run feedrate for dry run DRY

Setting
data
Feedrate
DRY
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Function
The feedrate entered here is used in the active program instead of the
programmed feedrate when the function "Dry run feedrate" (program
control) is selected in "Automatic" mode.
Operating sequence
Select softkey "Setting data".
The vertical softkey bar changes.
Select softkey "Feedrate DRY".
The "Dry run feedrate" window is opened.
Change the dry run feedrate:
Enter a new value.
"Parameters" Operating Area
5.5 Setting data
5
5-237