Siemens SINUMERIK 840D Operator's Manual page 101

4
03.04
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
4.1 Data structure of the NC control
Other information
The basic display of the selected mode appears on the screen.
If a mode change is not possible, please contact your installation
engineer, the machine-tool manufacturer or our service personnel.
In many cases, a mode change is enabled only for trained personnel
for the purpose of safety. To provide this type of protection, the control
system offers a facility for disabling or enabling mode changes.
/FB/, K1, Description of Functions
Machine Operating Area
4-101
4