Jog Mode; Function And Main Screen - Siemens SINUMERIK 840D Operator's Manual

4
03.04
4.4

JOG mode

4.4.1 Function and main screen

Jog
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Function
In manual mode you can:
1. Synchronize the control measuring system with the machine
(reference point approach),
2 Set up the machine, i.e. activate manually controlled motions on
the machine using the keys and handwheels provided on the
machine control panel,
3 Activate manually controlled motions on the machine using the
keys and handwheels provided on the machine control panel while
a part program is interrupted.
The following main screen for "Jog" is displayed when you press the
"Area switchover" key
and the "Jog" key.
The "Jog" basic display contains values relating to position, feedrate,
spindle and tool.
Machine
Channel reset
MCS Position Repos offset
-X 90.646 mm
+X900.000mm0.000
+Y 113.385 mm
-Y-156.000mm0.000
+Z230.000mm0.000 +Z 109.131 mm
+V 0.000 mm
Scratch
Preset
Machine Operating Area

4.4 JOG mode

Jog
Program aborted
Master spindle
0.000 Act. +
0.000 Set
0.000 Pos
0.000
Power [%]
Feedrate
Act. 7000.000
Set 7000.000
Tool
Preselected tool:
G0 G91
Handwheel
4
G. fct. +
transf.
Display
aux. funct.
S1
0.000 rpm
Spindles
0.000 rpm
0.000 deg.
Axis
0.000 %
feedrate
mm/min
0.000%
Zoom
Act. val.
Act. val.
WCS
INC
4-119