Siemens SINUMERIK 840D Operator's Manual page 256

5
"Parameters" Operating Area
5.8 Display system variables
Delete
variable
Delete
all
5-256
The following properties can be altered:
· Identifier
Displayed OPI variable
Variable type REAL
CHAR
STRING
BOOL
VARIANT
INT
Access level 0 to 7 are possible
· Limit value check Min + Max only Min or only Max or
· Text:
Dialog line text
Graphic text
Text for units
Screen text
· Text orientation and text positioning,
(when 0 values are entered, the field is automatically set to default
values.)
· Text size (character size) and display type
· Path for help screen file
Path for help text file
Index in the help text file
You can display additional information about the variables (variable
description) by pressing the "info key".
If you want to remove a system or user variable from a view, select it
and press the softkey "Delete variable".
You can delete the entire contents of the display with "Delete all",
which does not affect a stored view on which the screen contents are
based.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Assign variable name,
Assign a different variable,
Number of places after the decimal
point:
text length:
Selection for format
Format: Decimal
Binary
Hex
list entries
Long text on right next to header
Text on left next to I/O field
Text on right next to I/O field
Displayed variable text
Search text
Ó Siemens AG, 2004. All rights reserved
5
03.04
B, W, D, BU, WU, DU
B, W, D
BU, WU, DU