Huawei CX320 User Manual page 89

CX320 Switch Module
User Guide
l
Procedure
Step 1 Log in to the MM910 CLI by using PuTTY and the floating IP address of the MM910.
For details about how to use PuTTY, see
Network Port by Using
Step 2 Log in to the SOL CLI.
telnet 0 1101
The command output is as follows:
*=====================================================================*
*
*
*=====================================================================*
user name:
Step 3 Enter the user name and password.
The following information is displayed:
Log in Success!
*=================================================================================
==========================
Swi1~Swi4(33 ~ 36) and COM#(n)
*=================================================================================
==========================
Blade1~Blade16(1 ~ 16)
Blade1A~Blade16A(17 ~ 32)
Swi1~Swi4(33 ~ 36)
Please input your choice:
In the information displayed:
l
l
Step 4 Enter the slot number of the switch module, and press Enter.
l
l
Issue 09 (2019-08-02)
Password for logging in to the switch modules to be connected
Default password: Huawei12#$
PuTTY.
Welcome to SMM SOL Server
Please log in with SMM account and password.
please input the SOL Blade1~Blade16(1 ~ 16), Blade1A~Blade16A(17 ~ 32),
press Ctrl+R to return
The numbers 1 to 32 indicate the compute nodes in slots 1 to 32 respectively.
The numbers 33 to 36 indicate the switch modules in slots 1E, 2X, 3X, and 4E
respectively.
The secreen for selecting the serial port is displayed.
NOTE
For details about the serial port options, see
If an SOL connection has been connected through the serial port, a message will be
displayed asking you whether to forcibly disconnect the existing SOL connection.
Copyright © Huawei Technologies Co., Ltd.
6.2 Logging In to the MM910 CLI Over a
Table 2-2.
6 Common Operations
*
*
83