Huawei CX320 User Manual page 67

CX320 Switch Module
User Guide
Step 2 Use an SSH connection tool to connect to the IP address of a switching plane to log in to the
CLI of the switching plane.
This topic uses PuTTY as an example for login over SSH. For details, see
the MM910 CLI Over a Network Port by Using
----End
l
Step 1 Connect the Ethernet port on the PC to the MGMT port on the active or standby MM910. For
details, see
Issue 09 (2019-08-02)
Figure 4-4 Connection between the local PC and an idle STACK port on an
MM910 stacked
Log in to the CLI of a switching plane over SOL.
Step 1 in "Log in to the CLI of a switching plane over SSH.".
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the CX320
PuTTY.
6.2 Logging In to
61