Huawei CX320 User Manual page 111

CX320 Switch Module
User Guide
226 File received ok
FTP: 354428 byte(s) send in 0.238 second(s) 1454.289Kbyte(s)/sec.
200 Port command successful.
150 Opening data connection for log_3_20140116085018.log.zip.
/
226 File received ok
FTP: 353715 byte(s) send in 0.265 second(s) 1303.486Kbyte(s)/sec.
[ftp]cd ..
# On the FTP server, create a log receiving directory for the standby or slave switch module in
the stack. Replace 2 in swi2 with the actual stack ID of the standby or slave switch module.
The stack ID is the switch module slot ID. (If the switch modules are not stacked, log in to the
remaining switch modules and follow the preceding procedure to collect logs.)
[ftp]mkdir swi2
[ftp]cd swi2
[ftp]mput 2#flash:/logfile/*
[ftp]cd ..
[ftp]quit
221 Windows FTP Server (WFTPD, by Texas Imperial Software) says goodbye
<HUAWEI>
4.
----End
Issue 09 (2019-08-02)
100% [***********]
NOTE
l When you use the mput command in the FTP CLI, 2#flash:/ indicates the flash root directory of the
switch module with the ID 2. You can obtain the stack ID and role information by using the display
stack command.
l The flash root directory of the primary switch module in a stack is flash:/.
l If multiple switch modules are displayed after running the display stack command, obtain the log
file of each switch module.
View the log file in the FTP directory on the PC.
Copyright © Huawei Technologies Co., Ltd.
6 Common Operations
105