Huawei CX320 User Manual page 27

CX320 Switch Module
User Guide
Table 2-2 External ports
Name
Serial
port
10GE
optical
port
40GE
optical
port
PIC 1
Issue 09 (2019-08-02)
Typ Quantit Subcard
e y Number
RJ-4 1 -
5
SFP 8 17
+
QSF 2 20
P+
- - 21
Copyright © Huawei Technologies Co., Ltd.
Port Serial Description
Number
- The serial port can be
used to connect to the
BMC or converged
switching plane. During
the BMC startup, the
serial port is used by the
BMC. In other cases, the
serial port is used by the
10GE converged
switching plane by
default, and can be
switched to the BMC
over SOL.
NOTE
The baud rate is 115200
bit/s when the serial port
is connected to the BMC
or converged switching
plane.
1 to 8 The panel provides eight
10GE optical ports to
connect to external
networks.
1 to 2 The panel provides two
40GE optical ports to
connect to external
networks or serve as
stacking ports.
- A flexible card can be
installed in slot PIC 1 for
port expansion. The
expanded ports depend
on the flexible PIC card
type.
2 Product Overview
On the CLI, the serial port
corresponds to the
following options:
l bmccom: serial port
connecting to the
BMC.
l fabriccom: serial port
connecting to the
converged switching
plane.
21