Huawei CX320 User Manual page 113

CX320 Switch Module
User Guide
1.
<HUAWEI> reboot
The command output is as follows:
Warning: Current configuration will be saved to the next startup saved-
configuration file! Continue? [Y/N]:
Enter Y to save the configuration. The command output is as follows:
Now saving the current configuration.
Save the configuration successfully.
begin synchronize configuration to SMM ...
slot 4: configuration is the same with SMM, needn't sync to
SMM.
System will reboot! Continue? [Y/N]:
Enter Y to restart the converged switching plane.
2.
The command output is as follows:
Password:
3.
The BIOS menu screen is displayed:
Enter your choice(1-9):
4.
----End
Issue 09 (2019-08-02)
Run the following command on the CLI of the converged switching plane to restart the
converged switching plane:
Press Ctrl+B when the system displays Press CTRL+B to enter BIOS menu.
Enter the BIOS login password.
BIOS Menu (Version: 2.42)
1. Continue to boot
2. Update from serial interface
3. Update from ethernet interface
4. Modify startup parameters
5. File system
6. Modify BIOS password
7. Modify console password
8. Rollback from VRPv8 to VRPv5
9. Reboot
Perform an operation on the menu based on service requirements.
Copyright © Huawei Technologies Co., Ltd.
A Appendix
107