Configuring Switching Service Data - Huawei CX320 User Manual

CX320 Switch Module
User Guide
[~HUAWEI-aaa] display aaa local-user
Type: F - Ftp, T - Telnet, M - Terminal, S - Ssh, N - Snap, X - Dotlx
-----------------------------------------------------------------------
Username
-----------------------------------------------------------------------
root
user123
-----------------------------------------------------------------------
[~HUAWEI-aaa]
Step 9 Exit the AAA view.
[~HUAWEI-aaa] quit
Step 10 Quit the system view.
[~HUAWEI] quit
Step 11 Run the save command and enter y as prompted to save configuration data.
<HUAWEI> save
----End

4.8 Configuring Switching Service Data

Configure the CX320 feature data after the converged switching plane meets the basic
configuration conditions.
Feature configuration for the converged switching plane is as follows. For details, see
Switch Module V100R001C10 Configuration
Table 4-9 List of configurable features
Configuration Type
Basic Configuration
Virtualization
Configuration
Issue 09 (2019-08-02)
State Type Access-limit Online Admin-level User-group-id
Active S
Active S
Configuration Item
l ZTP Configuration
l Logging In to the System for the First Time
l Configuring a User Interface
l Configuring User Login
l File Management
l Configuring System Startup
l Centralized Management for Configuration Files
l BIOS Menu
Stack Configuration
Copyright © Huawei Technologies Co., Ltd.
-- 0 3
-- 0 2
Guide.
4 Configuring the CX320
--
--
CX320
71