DNC Plant/DNC Cell (FBDN1)
3 Operator interface
Toolbar
Fig. 3-2: Toolbar on the user interface
The toolbar contains icons for the following functions:
Open
Cut
Copy
Paste
Back (for workpieces)
Delete
Properties
Download
Upload
Filter (on/off)
NC Package Viewer (only available in conjunction with Siemens PLM Team
Center)
Filter bar
Fig. 3-3: Filter bar on the user interface
The filter bar indicates which filter is currently selected. It can also be used to
select other predefined filters. The switch position of the filter icon in the toolbar
indicates whether the filter is currently activated or deactivated.
When you choose Filter, a dialog is displayed in which you can add or change
filters in the filter editor (View Filter Editor).
FBDN1/3-32
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07