Fig. 10-8: Config Dialog / Tab: Code Conversion Server - Siemens Sinumerik 840D sl Function Manual

05.07
Code Conversion Server tab page / [DNCConv] section

Fig. 10-8: Config dialog / tab: Code Conversion Server

The Code Conversion Server tab page is the [DNCConv] section of the machine
configuration file. You specify the code conversion type here. Conversions from
ASCII to CNC code are carried out when data is downloaded and from CNC code
to ASCII when data is uploaded.
You can select the following code conversion types from a combination field:

ASCII

ISO

EIA
Note
Do not enter a code conversion server in the [SERINTSVR] section or on the
Code Conversion Server tab page if code conversions are not to be carried out.
;CNCConverter=DNCConv.CodeConvert
Extract from machine configuration file:
DNCConv]
CNCcode=ISO
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
10 Configuration
FBDN1/10-171