Special Tools - Siemens Sinumerik 840D sl Programming Manual

Note
Brief description of the tool parameters can be found on the user interface.
For further information, see:
References:
Function Manual, Basic Functions; Tool Offset (W1)
6.5.6

Special tools

The following tool types are available in the "Special tools" group:
700
710
711
730
Tool parameters
The following figure provides an overview of which tool parameters (DP...) for "Slotting saw"
tool type are entered in the compensation memory:
Fundamentals
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
Slotting saw
3D probe
Edge probe
Stop
Tool offsets
6.5 Tool types
69