M26/M27, Side Panels Mounted On Right And Left - Siemens SINAMICS S120 Equipment Manual

Options

8.33 M26/M27, side panels mounted on right and left

8.33 M26/M27, side panels mounted on right and left
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Module
● Basic Line Module
● Smart Line Module
● Active Line Module
● Motor Module in chassis format
● Booksize Base Cabinet
● Central Braking Module
● Auxiliary Power Supply Module
Description
The side panels (option M26 = side panel mounted on the right; option M27 = side panel
mounted on the left) are fitted at either end of a side-by-side cabinet unit configuration.
With the option M26, the Cabinet Module is fitted with a side panel on the right.
With the option M27, the Cabinet Module is fitted with a side panel on the left.
For each cabinet row installed, you must mount one side panel on the right (option M26)
and one on the left (option M27).
On Cabinet Modules that are delivered with a side panel, the DC connection clamp is
omitted from the side wall. If the installation sequence is modified and the side panel
removed, then a DC connection clamp must be inserted.
428
DANGER
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A