Siemens SINAMICS S120 Equipment Manual page 103

Cable routing for signal cables to terminal blocks -X45, -X46, -X47
1. Feed the cable into the cabinet from the bottom left.
2. Guide the cable up and, when it reaches the terminal blocks, to the right.
3. Secure the cable at suitable points.
4. Connect the cable to terminals -X45, -X46, and -X47.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
Auxiliary Power Supply
Module
Electrical installation
4.5 Connections
103