Deleting A Gre Tunnel; Managing Layer 3 Switching - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.30.4

Deleting a GRE Tunnel

To delete a GRE tunnel, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to tunnel » gre. The Generic Routing Encapsulation Interfaces table appears.
1
Figure 787: Generic Routing Encapsulation Interfaces Table
1. Add Button
3. Click Delete next to the chosen tunnel.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.31

Managing Layer 3 Switching

A switch is an inter-network device that makes frame forwarding decisions in hardware. A Layer 3 switch,
sometimes called a multilayer switch, is one which makes hardware-based decisions for IP packets as well
as Layer 2 frames. Traditionally, routers are used to make routing decisions using software. A Layer 3 switch
will make the same decisions in hardware, which means that packet forwarding will be much faster than in a
conventional router.
Deleting a GRE Tunnel
2. Edit Button 3. Delete Button
Setup and Configuration
2 3
Chapter 5
667