Deleting A Routing Map Filter - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 603: Set Form
1. Metric Box 2. Metric Type Box
On the Route Map Entry form, configure the following parameter(s) as required:
6.
Parameter
Action
Call Route Map
On Match Goto
7. On the Set form, configure the following parameter(s) as required:
Parameter
Metric
Metric Type
8. Configure the match rules for the route map filter. For more information, refer to
"Configuring Match
9. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
10. Click Exit Transaction or continue making changes.
Section 5.21.6.5

Deleting a Routing Map Filter

To delete a route map filter for dynamic OSPF routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » ospf » filter » route-map. The Route Map table appears.
524
1
2
Description
Synopsis: deny, permit
Default: permit
Action.
Jump to another route-map after match+set.
Go to this entry on match.
Description
Metric value.
External route type.
Rules".
RUGGEDCOM ROX II
User Guide
Section 5.21.6.7,
Deleting a Routing Map Filter