Adding An Option 82 Class To An Ip Pool - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
If no Option 82 classes have been configured, add classes as needed. For more information, refer to
Section 5.15.16.2, "Adding an Option 82 Class to an IP
Section 5.15.16.2

Adding an Option 82 Class to an IP Pool

To add an Option 82 class to an IP pool, do the following:
NOTE
The format for the Circuit ID value is 00:00:00:{vlan}:{slot}:{port}. If the remote host is connected to
LM3/1 on VLAN 1, the ID would be 00:00:00:01:03:01.
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to services » dhcpserver » subnet » {name} » options » ippool » {description} » option82,
where {name} is the name of the subnet and {description} is the name of the IP pool.
3. Click <Add option82>. The Key Settings form appears.
Figure 393: Key Settings Form
1. Class Name Box
4. Configure the following parameter(s) as required:
Parameter
class-name
Click Add to create the class. The Option 82 Configuration form appears.
5.
Adding an Option 82 Class to an IP Pool
1
2. Add Button
Description
The class name of option 82.
Pool".
Chapter 5
Setup and Configuration
2
359