Viewing The Link Failover Log; Viewing The Link Failover Status - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.27.1

Viewing the Link Failover Log

To view the link failover log, do the following:
Navigate to services » link-failover » {interface}, where {interface} is the name of the interface.
1.
2. Click log in the menu. The Trigger Action form appears.
Figure 700: Trigger Action Form
1. Perform Button
3. Click Perform. The Link Failover Logs form appears.
Figure 701: Link Fail Over Logs form
Section 5.27.2

Viewing the Link Failover Status

The Link Failover Status form displays the current link failover status. To view the link failover status, navigate
to services » link-failover » {interface} » status, where {interface} is the name of the interface. The Link Fail
Over Status form appears.
Viewing the Link Failover Log
Chapter 5
Setup and Configuration
1
601