Clearing Switched Ethernet Port Statistics - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
LateCollisions
Pkts64Octets
Pkts65to127Octets
Pkts128to255Octets
Pkts256to511Octets
Pkts512to1023Octets
Pkts1024to1518Octets
Section 3.18.6

Clearing Switched Ethernet Port Statistics

To clear the statistics collected for a specific switched Ethernet port, do the following:
1. Navigate to interfaces » switch » {slot/port}, where {slot/port} is the slot name and port number of the
switched Ethernet port.
2. Click clear-serial-port-statistics in the menu. The Trigger Action form appears.
Figure 103: Trigger Action Form
1. Perform Button
3. Click Perform.
Clearing Switched Ethernet Port Statistics
Description
The number of received packets for which a Late Collision Event has been detected.
The number of received and transmitted packets with a size of 64 octets. This
includes received and transmitted packets as well as dropped and local
received packets. This does not include rejected received packets.
The number of received and transmitted packets with a size of 65 to 127 octets. This
includes received and transmitted packets as well as dropped and local received packets.
This does not include rejected received packets
The number of received and transmitted packets with a size of 128 to 257 octets. This
includes received and transmitted packets as well as dropped and local received packets.
This does not include rejected received packets
The number of received and transmitted packets with size of 256 to 511 octets.
This includes received and transmitted packets as well as dropped and local
received packets. This does not include rejected received packets.
The number of received and transmitted packets with size of 512 to 1023 octets.
This includes received and transmitted packets as well as dropped and local
received packets. This does not include rejected received packets
The number of received and transmitted packets with a size of 1024 to 1536
octets. This includes received and transmitted packets as well as dropped and
local received packets. This does not include rejected received packets.
Chapter 3
Device Management
1
103