Panasonic AFPE224300 User Manual page 115

FP-e (A: Available, N/A: Not available)
Register
No.
Matsushita
IEC
Clock/calendar
DT9054
setting
%MW5.9054
(minute/second)
DT9055 Clock/calendar
setting (day/hour)
%MW5.9055
Clock/calendar
DT9056
setting
%MW5.9056
(year/month)
Clock/calendar
DT9057
setting (day-of-the-
%MW5.9057
week)
DT9058 Clock/calendar time
setting
%MW5.9058
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
The year, month, day, hour, minute, second and
day-of-the-week data for the calender timer is
stored. The built-in calendar timer will operate
correctly through the year 2099 and supports
leap years. The calendar timer can be set by
writing a value using a programming tool
software or a program that uses the F0 (MV)
instruction.(see example for DT90058)
By setting the highest bit of DT9058 to 1, the
time becomes that written to DT9054 to DT9057
by the F0 (MV) instruction. After the time is set,
DT9058 is cleared to 0. (Cannot be performed
with any instruction other than the F0 (MV)
instruction.)
<Example>
Set the time to 12:00:00 on the 5th day when
X0 turns on.
FPWIN GR:
If you changed the values of DT9054 to DT9057
with the programming tool software, the time will
be set when the new values are written.
Therefore, it is unnecessary to write to DT9058.
Descriptions
Read Writ
-ing -ing
A A
A A
11-17