Controllers
4.9 Operation and configuration of the control unit
Parameter ID
Name
COUNTER
p20121
REF_COUNTER_IN
p20122
REF_COUNTER_RESET Reset input of the counter (counter is reset to 0)
4.9.5.4
Parameter assignment for special applications
The drive values can be matched to the individual door for specific applications with the aid
of the integrated terminal module or the SIDOOR Service Tool (optional).
Parameters can also be changed with the aid of the SIDOOR User Software (optional, part
of the SIDOOR Software Kit).
Note
After the optimal parameter settings have been determined, they can be noted in the
configuration protocol (see appendix Configuration protocol (Page 309)). These records
should also be kept at hand when asking questions on the Hotline.
188
Description
Count input of the counter (a positive edge increments the counter)
ATD4xxW Door Controller for Industrial Applications
System Manual, 01/2017, A5E38080677-AB