Siemens SIDOOR ATD401W System Manual page 186

Controllers
4.9 Operation and configuration of the control unit
Parameter Name
ID
p20053 DCMD_SBIT0_Q61
p20054 DCMD_SBIT0_Q62
p20039 DCMD_SBIT0_Q47
p20043 DCMD_SBIT0_Q51
p20047 DCMD_SBIT0_Q55
p20051 DCMD_SBIT0_Q59
p20055 DCMD_SBIT0_Q63
AND
p20015 DCMD_AND0_Q17
p20016 DCMD_AND1_Q18
(As of V1.10)
p20056 DCMD_AND2_Q64
OR
p20017 DCMD_OR0_Q19
p20018 DCMD_OR1_Q20
NOT
p20019 DCMD_NOT0_Q21
p20020 DCMD_NOT1_Q22
XOR
p20021 DCMD_XOR0_Q23
FRQ
p20022 DCMD_FRQ0_Q24
p20023 DCMD_FRQ0_Q25
p20024 DCMD_FRQ1_Q26
p20025 DCMD_FRQ1_Q27
DELAY
p20026 DCMD_OnDELAY_Q28
p20027 DCMD_OnDELAY_Q29
COUNTER
p20028 DCMD_COUNTER_Q30 Output is active as long as the counter value is 0.
p20029 DCMD_COUNTER_Q31 Output is active as long as the counter value is 1.
p20030 DCMD_COUNTER_Q32 Output is active as long as the counter value is 2.
186
Description
Falling (negative) edge
Level-controlled output, output follows the input directly
Level-controlled output; output follows the input inverted
Output is logically AND-combined with inputs. A discrepancy analysis of the in-
puts can be additionally activated.
Output is logically AND-combined with inputs.
Output is logically ANDed with inputs. a discrepancy analysis of the inputs can be
additionally activated.
Output is logically OR-combined with inputs.
Output is logically NOT-combined with inputs (negation).
Output is logically exclusively OR-combined with inputs.
Output becomes active as soon as the frequency is detected.
Output follows positive input signal delayed by the set delay time.
tected.
The entered driver order (DCMD) is automatically
latched (stored).
ATD4xxW Door Controller for Industrial Applications
System Manual, 01/2017, A5E38080677-AB