Remote Alarm Support For Link Event - Huawei OptiX OSN 550 Configuration Manual

7 List of Parameters
Impact on the System
Before IEEE 802.3ah is enabled, the local and opposite ends fail to negotiate with each other if
OMA Working Mode is set to Passive.
Values
Valid Values
Active, Passive
Value
Active
Passive
Configuration Guidelines
None.
Relationship with Other Parameters
None.

7.49 Remote Alarm Support for Link Event

Description
The Remote Alarm Support for Link Event parameter specifies whether to report the detected
link events (for example, Error Frame Period Threshold, Error Frame Monitor
Threshold, and Error Frame Second Threshold) to the opposite end.
Impact on the System
After the Remote Alarm Support for Link Event parameter is set to Enabled, link event alarms
are displayed in the opposite equipment if any link events occur.
Values
Valid Values
Enabled, Disabled
7-44
OptiX OSN 550 Multi-Service CPE Optical Transmission
Description
Indicates that a port actively transmits the IEEE 802.3 ah
packets.
Indicates a port transmits the IEEE 802.3 ah packets to
the opposite end only after receiving IEEE 802.3 ah
packets from the opposite end.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
Active
Default Value
Enabled
System
Configuration Guide
Issue 02 (2011-06-30)