Flow Control - Huawei OptiX OSN 550 Configuration Manual

4 Configuring Ethernet Services
Field
Maximum Frame Length
Port Physical Parameters
MAC Loopback
PHY Loopback

4.11.2 Flow Control

This topic describes the parameters, such as autonegotiation and non-autonegotiation, which are
used for configuring flow control function of an Ethernet port.
Table 4-37
4-132
Value Range
1518-9600
Default value: 1522
Displays the value that is
queried.
Non-Loopback, Inloop
Default value: Non-Loopback
Non-Loopback, Inloop
Default value: Default Value
lists the parameters that are used for configuring flow control of an Ethernet port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Description
The Maximum Frame
Length (Ethernet Port
Attribute) parameter specifies
the maximum frame length
that is supported at an Ethernet
port.
You can click
Frame Length (Ethernet
Port Attribute)
detailed information.
Displays the actual working
status of the port.
The MAC Loopback
(Ethernet Port Attribute)
parameter specifies the MAC
loopback state at an Ethernet
port. Port loopback setting is
applied to locating faults only.
You can click
Loopback (Ethernet Port
Attribute)
detailed information.
The PHY Loopback
(Ethernet Port Attribute)
parameter specifies the PHY
loopback state at an Ethernet
port. Port loopback setting is
applied to locating faults only.
You can click
Loopback (Ethernet Port
Attribute)
detailed information.
System
Configuration Guide
7.2 Maximum
to display the
7.5 MAC
to display the
7.6 PHY
to display the
Issue 02 (2011-06-30)