Huawei OptiX OSN 550 Configuration Manual page 147

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Parameter
Level
Direction
Source Slot
Source VC4
Source Timeslot
Range(e.g.1,3-6)
Sink Slot
Sink VC4
Sink Timeslot
Range(e.g.1,3-6)
Activate
Immediately
Step 3 Configure the pass-through services of NE4.
1.
2.
Issue 02 (2011-06-30)
Value in
This
Example
VC12
Bidirectional
3-SP3D
-
1-5
2-SL1D-1
(SDH-1)
VC4-1
1-5
Yes
In the NE Explorer, select NE4 and then choose Communication > SDH Service
Configuration from the Function Tree.
Click Create on the lower-right pane to display the Create SDH Service dialog box. Set
the parameters that are required, and then click OK.
Parameter Value in
This
Example
Level VC12
Direction Bidirectiona
l
Source Slot 1-SL4D-2
(SDH-2)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
In this example, E1 services are configured. Hence,
Level of the E1 services is set to VC12.
In this example, the services are transmitted and received
on the same path. That is, the services are Bidirectional
services.
In this example, the SP3D board in slot 3 of NE5 is
configured as the source tributary board. See
3-18.
-
In this example, five E1 services are configured between
NE3 and NE5. Hence, the service source occupies
VC-12s 1-5.
In this example, the SL1D board in slot 2 of NE5 is
configured as the sink line board. See
In this example, the service sink uses the timeslots of
VC4-1.
In this example, five E1 services are configured between
NE3 and NE5. Hence, the service sink occupies VC-12s
1-5.
-
Description
In this example, E1 services are configured. Hence,
Level of the E1 services is set to VC12.
In this example, the services are transmitted and
received on the same path. That is, the services are
Bidirectional services.
In this example, the SL4D board in slot 1 of NE4 is
configured as the source line board. See
3 Configuring SDH Services
Figure
Figure 3-18.
Figure 3-18.
3-65