Huawei OptiX OSN 550 Configuration Manual page 289

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Field
Broadcast Packet Suppression
Broadcast Packet Suppression
Threshold
Issue 02 (2011-06-30)
Value Range
Enabled, Disabled
Default value: Disabled
10%-100%
Default value: 30%
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring Ethernet Services
Description
The Broadcast Packet
Suppression (Ethernet
Interface Attributes)
parameter specifies
whether to enable the
function for a port to
suppress the broadcast
packets and to control the
traffic of the broadcast data
packets that enter the port.
If the broadcast packet
suppression function is
enabled, and if the
broadcast traffic exceeds
the specified threshold
value, the broadcast
packets that enter the port
are discarded.
You can click 7.12
Broadcast Packet
Suppression (Ethernet
Interface Attributes)
display the detailed
information.
The Broadcast Packet
Suppression Threshold
(Ethernet Interface
Attributes) parameter
allocates the specified
bandwidth to the broadcast
packets. The bandwidth is
allocated on the basis of the
traffic proportion at the
port. If the bandwidth
allocated to the broadcast
packets reaches the
specified threshold, the port
discards the broadcast data
packets that are received.
You can click 7.11
Broadcast Packet
Suppression Threshold
(Ethernet Interface
Attributes) to display the
detailed information.
to
4-135