Vlan Id (For Creation Of Ethernet Virtual Private Lines); Bridge Learning Mode (Ethernet Lan Service) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Configuration Guidelines
Select the value according to the network. Generally, select C-VLAN and S-VLAN allocated
by the carrier.
Relationship with Other Parameters
None.
7.29 VLAN ID (For Creation of Ethernet Virtual Private
Lines)
Description
VLAN ID-- stands for virtual local area network identifier. If port+VLAN is selected in the
policy of using a port, you can select different VLAN IDs (1-4095) to represent different Ethernet
services.
Impact on the System
The system operation is not affected.
Values
Value Range
1 to 4095
Configuration Guidelines
l
l
Relationship with Other Parameters
This parameter is valid only when you set "Flow Type" to "Port+VLAN".

7.30 Bridge Learning Mode (Ethernet LAN Service)

Description
Bridge Learning Mode (Ethernet LAN Service) indicates how the bridge learns the MAC
address. Bridge Learning Mode is classified into the shared VLAN learning and independent
VLAN learning modes. The shared VLAN learning mode indicates learning and forwarding
Issue 02 (2011-06-30)
The value range is relevant to the encapsulation format of the P port (Per-NE configuration).
In the case of Martinioe, the value ranges from 16 to 1023. In the case of stack VLAN, the
value ranges from 1 to 4095.
The VLAN IDs at both ends of a link must be the same. In the case of different Ethernet
services, you can set the VLAN ID to different values.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
-
7 List of Parameters
7-31