Power Switch - Hitachi AMS 2100 Hardware Manual

Figure
high-density expansion unit. They are all described briefly in this chapter
and in detail in
The front of the AMS 2100 and AMS 2300 base units are identical. Light-
Emitting Diode (LED) indicators show the unit's power, ready, warning, and
alarm status.

Power switch

The Power switch for turning the controllers and drives in a base unit is also
located on the front of the unit. Facing the front of the base unit, this switch
is located at the lower right corner. Pressing on the right button turns the
power on. Pressing on the left button turns the power off.
1–4
shows a basic illustration of a base unit, two expansion units, and a
Chapter 4, Hardware
Figure 1-2: Front View of base unit
Introduction
Hitachi AMS 2100/2300 Storage System Hardware Guide
components.