Hitachi AMS 2100 Hardware Manual page 206

Set up email alert
This dialog box sets up Navigator 2 so that if an error occurs in the array, it
will send an email report describing the error to as many as three email
addresses that are entered here. Follow these steps to set up email
notification:
1. Click Enable. The fields in this dialog box are now enabled and you can
2. Enter the domain name of the mail server. Example: hds.com.
3. Enter the IP address of the email server that will route the email
4. Enter a From email address. This email address will appear on the
5. Enter up to three email addresses of people to whom the alerts will be
6. (Optional) Enter a Reply To email address.
7. Click Next> to exit this screen and open the Set up Management Ports
7–24
enter data in them.
messages to the email addresses listed in this dialog box.
distributed email messages. This enables the users who receive the
reports to quickly identify the array from which the messages came.
sent.
screen.
Configuration
Hitachi AMS 2100/2300 Storage System Hardware Guide