Output of the logbook
You have the possibility of exporting the logbook by generating a file using the "Save
version" function in which the logbook is contained as section.
See also
Save information (Page 639)
13.7.1
Displaying and editing the logbook
Procedure
Editing end customer data
Note
Deleting logbook entries
As soon as the 2nd commissioning has been completed, the "Clean up" softkey to delete the
logbook data is no longer available.
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1.
Select the "Diagnostics" operating area.
2.
Press the "Version" softkey.
3.
Press the "Logbook" softkey.
The "Machine logbook" window opens.
You have the option of changing the address data of the end customer
using the "Change" softkey.
- OR -
Using the "Clean up" softkey, you can delete all logbook entries.
All entries, except the date of the first commissioning, are deleted and
the softkey "Clean up" is deactivated.
Alarm, error, and system messages
13.7 Logbook
641