Introduction
1.4 User interface
Note
Input order for functions
When using the square root or squaring functions, make sure to press the "R" or "S" function
keys, respectively, before entering a number.
1.4.9
Context menu
When you right-click, the context menu opens and provides the following functions:
● Cut
● Copy
● Paste
Program editor
Additional functions are available in the editor
● Undo the last change
● Redo the changes that were undone
Up to 10 changes can be undone.
48
Press the "Calculate" softkey.
- OR -
Press the <INPUT> key.
The new value is calculated and displayed in the entry field of the
calculator.
5.
Press the "Accept" softkey.
The calculated value is accepted and displayed in the entry field of the
window.
Cut Ctrl+X
Copy Ctrl+C
Paste Ctrl+V
Undo Ctrl+Z
Redo Ctrl+Y
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling