Parameter
Description
Swivel mode
Axis by axis: Rotate coordinate system axis-by-axis
•
Solid angle: Swivel via solid angle
•
Proj. angle: Swiveling via projection angle
•
Direct: Directly position rotary axes
•
Axis sequence
Sequence of the axes which are rotated around: - (only for axis-by-axis swivel mode)
XYZ or XZY or YXZ or YZX or ZXY or ZYX
X
Rotation around X
Y
Rotation around Y
Z
Rotation around Z
Projection
Position of the projection in space - (only for swivel mode, projection angle)
position
Xα, Yα, Zβ or Yα, Zα, Zβ or Zα, Xα, Zβ
Xα
Projection angle
Yα
Projection angle
Zβ
Angle of rotation in the plane
Name of rotary
Angle of rotation of rotary axis
axis 1
1
Name of rotary
Angle of rotation of rotary axis
axis 2
2
Z
Angle of rotation in the plane
X1
Zero point of rotated surface X
Y1
Zero point of rotated surface Y
Z1
Zero point of rotated surface Z
Direction
Direction reference of traversing direction of rotary axis 1 or 2
- (not for direct swivel mode)
+
•
-
•
Tool
Tool tip when swiveling
Correct
•
The position of the tool tip is maintained during swiveling.
No correction
•
The position of the tool tip is not maintained during swiveling.
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Programming technological functions (cycles)
- (only for axis sequence)
- (only for projection position)
- (only for direct swivel mode)
8.6 Further cycles and functions
Unit
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
483