Table of Contents
Advertisement
TRIGger:LEVel (?)
Group
Related Commands
Syntax
Arguments
Responses
Examples
TRIGger:MODE (?)
Group
Related Commands
Syntax
Arguments
Examples
3026 Programmer Manual
If the trigger is to be generated by a signal above a particular amplitude level in
the time domain, the TRIGger:LEVel command is used to set the level. The
TRIGger:LEVel? query returns the current trigger level setting.
TRIGGER
TRIGger:SOURce
TRIGger:LEVel <numeric value>
TRIGger:LEVel?
<numeric value>::=<NR2>
where <NR2> is a trigger level value ranging from 0.000 V to 8.000 V.
<NR2>
:TRIGGER:LEVEL 0.01
sets the level to 0.01 V.
The TRIGger:MODE command sets the trigger mode. The TRIGger:MODE? query
returns the current trigger mode setting.
TRIGGER
None
TRIGger:MODE {NORMal|AUTO}
TRIGger:SLOPe?
NORMal
selects the Normal mode.
AUTO
selects the Auto mode.
:TRIGGER:MODE AUTO
sets the trigger mode to Auto.
Command Descriptions
2 71
Advertisement
Table of Contents
