Table of Contents
Advertisement
Command Descriptions
SENSe:FRAMe:PERIOD (?)
Group
Related Commands
Syntax
Arguments
Responses
Examples
SENSe:FREQuency:CENTer (?)
Group
Related Commands
Syntax
2 54
The SENSe:FRAMe:PERIOD command sets the frame period that is used to acquire
data in block mode. The SENSe:FRAMe:PERIOD? query returns the current frame
period setting.
The period you may specify varies with the span setting.
SENSE
SENSe:ACQuisition[:MODE]
SENSe:FRAMe:PERIOD {MAXimum|MINimum|<numeric value>}
SENSe:FRAMe:PERIOD?
MAXimum
sets the frame period to the maximum.
MINimum
sets the frame period to the minimum.
<numeric value>::=<NR3>
where <NR3> is a frame period.
{MAXIMUM|MINIMUM|<NR3>}
:SENSE:FRAME:PERIOD 3.2E-4
sets the frame period to 320 ms.
The SENSe:FREQuency:CENTer sets the center frequency. The SENSe:FREQuen
cy? query returns the current center frequency setting.
SENSE
None
SENSe:FREQuency:CENTer {<numeric value>|MAXimum|MINimum}
SENSe:FREQuency:CENTer?
3026 Programmer Manual
Advertisement
Table of Contents
