Siemens SINUMERIK 840D sl Function Manual page 596

Index
Interface signals
from the drive, 8-366
to the drive, 8-361
L
Limiting frequency, 6-149
Limiting the speed setpoint, 11-577
Logbook, 9-408
M
Machine data for 840D
Description, 8-266
Overview, 8-261
Measuring system changeover, 11-579
Modulo display, 6-171
Modulo value, safe cams, 8-278
Monitoring channel, 7-181
Monitoring cycle, 5-91
for 840D, 8-266
Motor encoder, 5-96
Multiple assignment, 7-196
Multiple distribution, 7-195
N
NCK–SPL programming, 7-228
NCK–SPL SGEs/SGAs, 7-185
O
OEM applications, 11-580
P
Parking an axis, 11-579
Parking an axis with absolute reference,
11-579
Password for Safety Integrated, 4-57
Password Set, 9-403
PDS, 3-47
Power Drive Systems, 3-47
Powering–up, 5-112
Probability of failure, 3-46
Product Standards, 1-20
PROFIBUS–DP, 7-198
PROFIsafe clock cycle overruns, 7-210
PROG_EVENT mechanism, 7-231
PROG_EVENT.SPF, 7-231
I-596
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Protective mechanisms, 7-228
R
Redundancy, A-593
Reference point reached, 5-100, 5-101
Replacing a motor, 9-427
Replacing an encoder, 9-427
Risk, A-593
Risk analysis, 1-26
Risk assessment, 1-27
Rotary axis, 8-276
Cam actual value range, 6-171
Endlessly turning, 6-171
Modulo display, 6-171
Safe software cams, 6-171
S
Safe Brake Management, 7-250
Safe acceleration monitoring, 6-144
Safe cam track, 6-168, 6-172
Safe cams, 6-167
Safe limit switches, 6-163
Safe operating stop, 6-118
Deselection, 6-121
Features, 6-118
Prerequisites, 6-119
Selection, 6-119
Safe software cams
Features, 6-167
Prerequisites, 6-169
Special case, 6-169
Tolerance, 6-167
Hysteresis, 6-170
Safe software limit switches
Configurable stop responses, 6-164
Features, 6-163
Limit values, 6-163
Prerequisites, 6-164
Safe standstill
Features, 6-114
Selecting/deselecting, 6-114
Safe Stop 1, 4-61
Safely reduced speed, 6-148
Changing–over the limit values, 6-151
Override for, 6-156, 8-362
© Siemens AG 2008 All Rights Reserved
05.08