Commissioning
9.1 HMI screens and softkeys
Fig. 9-10
The list is transferred into the corresponding SI machine data and SINAMICS pa-
rameters using the softkey "Accept". They are rejected with "Abort". The user can
also adapt the values that have been determined.
The settings must be saved using the softkey "Confirm SI data" (see e.g. Fig.9-8).
The axis assignment is described in Chapter 9.2 "Procedure when commissioning
the system for the first time" under Step 3.
9-400
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Defining "SI encoder adaptation" for 840D sl
© Siemens AG 2008 All Rights Reserved
05.08