9.4
GOT Side Settings
9.4.1
Setting communication interface (Communication settings)
Set the channel of the equipment to be connected to the GOT.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: SHARP
• Controller Type: SHARP JW
• I/F: Interface to be used
• Driver: SHARP JW
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠
Click the [OK] button when settings are completed.
9 - 10
9.4 GOT Side Settings
2.
[Controller Setting] from the menu.
9.4.2 Communication detail settings
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠
1.1.3 I/F communication setting
3.
4.
Click!