Connecting To Jw-32Cuh, Jw-33Cuh Or Z-512J - Mitsubishi Electric GOT2000 Series Connection Manual

9.5.2

Connecting to JW-32CUH, JW-33CUH or Z-512J

■1. Settings for connecting to communication port 1 (PG/COMM1 port)
Set the system memory.
System
memory No.
#234
#235
*1
*2
■2. Settings for connecting to communication port 2 (PG/COMM2 port)
Set the system memory.
System
memory No.
#236
#237
*1
*2
9 - 14
9.5 PLC Side Setting
Item
Transmission speed,
parity and
stop bit
Station No.
Indicates only the transmission speeds that can be set on the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to the following.
➠
9.4.1 Setting communication interface (Communication settings)
Item
Transmission speed,
parity and
stop bit
Station No.
Indicates only the transmission speeds that can be set on the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to the following.
➠
9.4.1 Setting communication interface (Communication settings)
D7 D6 D5 D4 D3 D2
0 0 (3)
(1) Transmission speed
000: 19200bps
001: 9600bps
010: 4800bps
(2) Parity
10 (fixed): Even
(3) Stop bit
1 (fixed): 2 bits
1: Station No. 1 (fixed)
D7 D6 D5 D4 D3 D2
0 0 (3)
Transmission speed
(1)
000: 19200bps
001: 9600bps
010: 4800bps
(2) Parity
10 (fixed): Even
(3) Stop bit
1 (fixed): 2 bits
1: Station No. 1 (fixed)
Set value
to D0
(2) (1)
*1 *2
Set value
to D0
(2) (1)
*1 *2