Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

Precautions

■1. Station No. settings of the PLC side

In the system configuration, the PLC with the station number set with the host address must be included.For details of

host address setting, refer to the following.

■2. GOT clock control

The GOT clock function is available only for the PLC with the station number set with the host address.

For details of host address setting, refer to the following.

■3. System configuration

If the system is configured by mixing the PC3J extended function compliant PLC with the PC3J extended function

incompliant PLC, normal communication may not be performed.Unify the PLCs into PC3J extended function compliant

or PC3J extended function incompliant to configure the system.

■4. System alarm

The system alarm can be displayed only for the PLC set with a host address.When connected to the PC3J extended

function compliant PLC, only the system alarm of program No. 1 can be displayed.

8.7 Precautions

8.4.1 Setting communication interface (Communication settings)

Table of Contents