2.6 GOT Side Settings
2.6.1
Setting communication
interface (Communication
settings)
Controller setting
Set the channel of the equipment to be connected to the
GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Others
• Controller Type:Computer
• I/F: Interface to be used
• Driver:Computer
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
2.6.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT
POINT
POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
2 - 80
2. MICROCOMPUTER CONNECTION (SERIAL)
2.6 GOT Side Settings
Click!
[Controller Setting] from the
Extension setting for microcomputer
Set the GOT interface connecting to the n+1th GOT.
No setting is required for a terminal GOT.
POINT
POINT
POINT
Microcomputer connection extension
The setting is required when connecting multiple GOTs
for one microcomputer.
3.
4.
1.
Select [Common]
[GOT(Extended Computer)] from the menu.
2.
Set the interface to which the n+1th GOT is
connected.
3.
Clicking the detail setting button displays the
Communication Detail Settings dialog box for the
communication driver.
Item
Connection CH No.
Click the [OK] button when settings are completed.
2.
Click!
[Peripheral Setting]
Description
This CH No. is used for the
connection with a
microcomputer or n-1th GOT.
(Default: 1)
3.
Range
1 fixed