Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

13.6 Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Set the device name, device number, and bit number.
Device
The bit number can be set only when specifying the bit of word device.
Information Displays the device type and setting range which are selected in [Device].
POINT POINT POINT
(1) Device settings for TOSHIBA MACHINE PLC
(a) When setting relay address or word register address as bit device
Set the device No. with the rack No. (Hex), module position (Octal), and terminal No.
(Hex), in that order.
Device name
(b) When setting a relay address as a word device
Set the device No. with the rack No. (Hex) and module position (Octal), in that order.
For the device name setting, enter "w" before the bit device name.
Device name
(Bit device name with "W")
Description
Device number
Terminal No. (hex)
Module position (octal)
Rack No. (hex)
Device number
Module position (octal)
Rack No. (hex)
13.6 Device Range that Can Be Set
13
13 - 13