Siemens sinumerik 840D sl Function Manual page 255

Parameter
• Following axis:
• Leading axis:
• n, m
• p
• applim:
• Master value
• Slave value
• aproxmastervalue
• degrees
• memType
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
Identifier of axis via which the following axis is programmed in the definition.
Identifier of axis via which the leading axis is programmed.
Numbers for curve tables.
Curve table numbers can be freely assigned. They are used exclusively to uniquely
identify a curve table.
In order to delete a curve table area using the command CTABDEL(n, m) must be greater
than n.
Entry location (in memType memory area)
Behavior at the curve table edges.
– 0 non-periodic (table is processed only once, even for rotary axes).
– 1 periodic, modulo (the modulo value corresponds to the LA table values).
– 2 periodic, modulo (LA and FA are periodic).
Position value for which a following value is to be determined.
Position value for which a master value is to be calculated.
Position value that can be used to determine a unique master value in the case of an
ambiguous reversing function of the curve table.
Parameter in which the pitch of the table function is returned.
Optional parameter for specifying memory type to be used n curve tables.
Possible values:
"SRAM" curve table is created in static NC memory.
"DSRAM" curve table is created in dynamic NC memory.
If an invalid type is entered, the value 2 is returned.
If the parameter is omitted, then the memory type set via the following machine data
takes effect:
MD20905 $MC_CTAB_DEFAULT_MEMORY_TYPE (default memory type for curve
tables)
Detailed description
2.2 Curve tables
35