POWR
6. Remove the plastic washers r, spiral
spring t from the manual starter case.
r
t
r
7. Remove the starter rope y and collar u.
y
Checking the spiral spring (MH, WH)
1. Check the spiral spring. Replace if
cracked, bent or damaged.
Checking the drive pawl (MH, WH)
1. Check the drive pawl. Replace if worn or
damaged.
Checking the starter rope (MH, WH)
1. Measure the starter rope length. Replace
if the starter rope is worn or damaged.
Starter rope length:
(Reference data)
2,300 mm (90.6 in)
5-15
Power unit
61U50040
u
61U50050
Assembling the manual starter
(MH, WH)
1. Install the starter rope 1 into the sheave
drum 2.
2. Install the manual starter handle 3.
2
NOTE:
9 Tie a knot at the end of the starter rope as
shown in the illustration.
9 Be sure to leave 5.0–10.0 mm (0.2–0.4 in)
at the end a of the starter rope.
3. Wind the starter rope 1 1/2 around the
sheave drum in the direction of the arrow
shown in the illustration.
NOTE:
After winding the starter rope around the
sheave drum, install the starter rope in the
notch b.
3
1
a
61U50510
b
69D50090
61U5H11