Removing The Exhaust Cover; Checking The Exhaust Cover; Checking The Pcv; Installing The Pcv - Yamaha E115A Service Manual

Removing the exhaust cover

1. Remove the exhaust cover bolts in the
sequence shown.
NOTE:
Insert a flat-head screw driver between the
pry tabs to pry off the exhaust cover.

Checking the exhaust cover

1. Check the exhaust cover for distortion or
corrosion. Replace the exhaust cover if
necessary.
61U5H11

Checking the PCV

1. Remove the PCV.
2. Check the PCV for wear or deformation.
Replace the PCV if necessary.
3. Check the grommet for deformation.
Replace the grommet if necessary.
4. Check the spring for fatigue or deforma-
tion. Replace the spring if necessary.

Installing the PCV

1. Install a new gasket 1 and the PCV 2
with the its rounded side facing towards
the exhaust cover, and then tighten the
61U50100
bolts 3 to the specified torque.
61U50120
61U50130
Exhaust cover
1
3
PCV cover bolts 3:
1st: 4 N·m (0.4 kgf·m, 3.0 ft·lb)
2nd: 8 N·m (0.8 kgf·m, 5.9 ft·lb)
1
2
3
4
5
2
61U50390
6
7
8
9
5-26