Yamaha E115A Service Manual page 148

LOWR
2. Apply grease to new oil seals, and then
install them into the propeller shaft hous-
ing to the specified depth.
d
NOTE:
Install an oil seal halfway into the propeller
shaft housing, then the other oil seal.
Bearing inner race attachment 4:
90890-06640
Depth d:
4.75–5.25 mm (0.187–0.207 in)
3. Install the thrust washer 5 and new ball
bearing 6 onto the reverse gear 7 using
a press.
NOTE:
Install the ball bearing with the manufacture
identification mark e facing toward the pro-
peller side.
Ball bearing attachment 8:
90890-06656
6-11
Lower unit
4
61U60080
4. Install the reverse gear assembly into the
propeller shaft housing using a press.
NOTE:
After installing the reverse gear, check that
the reverse gear rotates smoothly.
Needle bearing attachment 9:
90890-06654
61U5H11