Yamaha E115A Service Manual page 127

13. Install the new gaskets 9 and the cylin-
der head 0, and then tighten the cylinder
head bolts to the specified torques in 2
stages and in the sequence shown.
9
0
PORT
NOTE:
Apply engine oil to the cylinder head bolts
before installation.
Cylinder head bolt:
1st: 15 N·m (1.5 kgf·m, 11.1 ft·lb)
2nd: 30 N·m (3.0 kgf·m, 22.1 ft·lb)
14. Install the thermoswitches q onto the
cylinder head w.
61U5H11
15. Install the new gaskets e and the cylin-
61U50790
STBD
61U50220
NOTE:
Apply LOCTITE 572 to the cylinder head
cover bolts before installation.
w
q
61U50225
der head covers r, and then tighten the
cylinder head cover bolts to the specified
torques in 2 stages and in the sequence
shown.
e
r
PORT
Cylinder head cover bolt:
1st: 4 N·m (0.4 kgf·m, 3.0 ft·lb)
2nd: 8 N·m (0.8 kgf·m, 5.9 ft·lb)
Crankcase
1
2
3
4
61U50800
STBD
5
6
7
61U50190
8
9
5-46